Product line if available
R-1140
Clear Silicone Adhesive
Description
- One-part, translucent, non-slumping silicone adhesive
- Supplied ready to use in Semco® cartridges
Applications
- Bonds aggressively to most surfaces including: glass, ceramics, most metals, natural and synthetic fibers, wood, painted surfaces, many plastics and other silicone rubbers
- For applications requiring a operating temperature range of -65 to 240°C (-85 to 465°F)
Product Details
| Property | Average Result |
|---|---|
| Cure System | Acetoxy |
| Lap Shear | 625 psi |
| Durometer | 30 Type A |
| Appearance | Translucent |
| Cure | 72 hours / RTV |
| Elongation | 350% |
| Flow Rate | 1.5 inches |
| Mix Ratio | 1 PART |
| Non-Volatile Content | 100% |
| Specific Gravity | 1.09 |
| Tack Free Time | 7 minutes |
| Tear | 40 ppi |
| Tensile | 700 psi |
| Comment | Non-slump. General all purpose adhesive for a variety of substrates. 625 psi (4.3 MPa), primed (SP-120) lap shear. |
Bonding
The diverse line of NuSil™ adhesives specifically designed for electronic component assembly increases production throughput without sacrificing performance.
The test data shown for this material is the average value for typical properties. All of these properties may not be tested on a lot to lot basis and cannot be used to draft specifications. Please contact NuSil for assistance and recommendations in establishing limits for product specifications.